Super Seal’s series 0201 Dock Seal are manufactured using kiln-dried wood and high grade, dense, light weight urethane foam core with 98% compression recovery and maintaining flexibility at -40° (fire retardant formula available; please specify). Foam core shall be continuously bonded (not spot glued) to the wood backing with an industrial, non-flammable elastic adhesive. Cover fabric shall be double stitched with high strength twisted 4 ply 100% polyester bonded, U.V. treated thread. Cover fabric overlaps wood backing totally enclosing it and fastened with heavy duty plated staples.
Vertical pads are vented through brass plated grommets, allowing air to be exhausted and moisture to drain. Vertical pads are tapered cut at the top to provide adequate drainage. Vertical pads have a 24” high 4” wide yellow guide stripe to aid in visibility. Unit shall come complete with a droop curtain over vertical pads. Full-width steel tube shall be inserted into a pocket on the head curtain to prevent sagging. The curtain is manually adjusted by means of rope and pulley assembly. Unit shall be furnished with galvanized mounting hardware to resist corrosion.
A 4” – 6” pad projection in front of the dock bumper face is recommended to prevent over-compression, excessive wear & tear and undue building wall pressure. The series 0201 can be fitted for openings up to 10′ W. x 12′ H. by the use of wedge-shaped verticals and longer curtain. A large selection of cover fabrics available including our exclusive SS-90-1 high-performance vinyl. Other available fabrics include Hypalon and neoprene.