With a dock height of 48” the 0401 seals trailers from 11’6” to 13’6” high from grade. Also seals trailers with width from 8’0” w. The series 0401 can be designed to suit a large variety of oversized door opening heights, widths and or dock projections.
Unit framework is constructed of 1 1/2” x 1-1/2” galvanized steel tubing covered with galvanized cladding. The header framework shall be peaked to allow adequate drainage. The vertical panel shall contain fiberglass stays, the top three (3) being a “Z” pattern to keep the curtain straight at all times. Vertical panels have a double layer of fabric at the leading edge impact area and a 4” wide x 14” high yellow guide stripe to aid in spotting shelters. The header panel to full height fiberglass stays and overlapping protective flaps at trailer impact areas. The header panel has elastic wind straps to keep the panel in position.
All stays are enclosed in multi-layer reinforcement pockets. Leading edge of vertical and header panels have a sewn in foam bead for a tight seal. Double stitched, high strength twisted 4 ply 100% polyester boned thread U.V. treated used for sewing throughout. All exterior front frame edge shall be trimmed with aluminum angle to provide a neat, clean finish. Unit to be furnished with all necessary mounting hardware, galvanized to resist corrosion. 18” – 20” projection in front of the dock bumper is recommended to provide a proper seal.
Optional protective steel guards are recommended for added protection and support.